Call for a FREE
Estimate
Click here for details

817.223.0977
or email us

Sherman area call
469.569.4092

The History of Fences / Fencing

RED HOT IMAGE GALLERY

Split-Rail Fencing
Click on a link below to see our porfolio of some completed projects!

We guarantee our work for one full year!

Click here for info

 

SPLIT-RAIL FENCES

Also known as "ranch-style" fencing.

Log fence with double posts (photo taken in 1938).A split-rail fence or log fence is a type of fence constructed out of timber logs, usually split lengthwise into "rails" and typically used for agricultural or decorative fencing. Such fences require much more timber than other types of fences, and so are not common in areas where wood is scarce or expensive. However, they are very simple in their construction, and can be assembled with few tools even on hard or rocky ground. They can even be partially or wholly disassembled if the fence needs moved or the wood becomes more useful for other purposes. During the Civil War, these split rail fences were a major source of firewood for both the Union and Confederate armies.

Split Rail FencingSplit rail fences were made of easy to split, rot resistant wood. Traditionally American chestnut was the tree of choice until wire fencing became cheaper and the chestnut blight eliminated this tree. Currently, most split rails are made from cedar logs. Whether of chestnut or cedar, these logs were cut to a legnth of 10 to 12 feet and split down the length of the log. Each half was then split into quarters, then eigths and so on until the rails were of a useable size. Depending on the diameter of the log, you could get 4 rails from an 8 inch log to over a dozen from larger logs. The pieces, called "rails," were stacked on top of one another. Most split rail fences had the rails stacked in an interlocking zig-zag fashion that is self-supporting, easy to create, easy to repair, and easy to dissasemble.

A split-rail fence with supports.

Some timber fences had the rails stacked directly on top of each other and secured them with double fence posts (one on either side of the rails). This made a more permananent and compact fence but remained easy to repair.

The length of a zig zag fence was such that the distance between either the zigs or the zags was 16 1/2 feet or one rod. A landowner could then count the zigs or the zags along the side and end of his field and determine the number of square rods in a field which in turn told him how many acres the field contained. One hundred sixty square rods is one acre, so a field ten rods times sixteen rods was an acre.

A split-rail fence in suburban America with wire fence cover, built 1999.

A variation on the traditional split-rail fence has become common in suburban America in the late 20th century. This variation is not free-standing but consists of vertical posts with holes into which the ends of rough hewn horizontal pieces are placed. A common addition to this, particular where pets or children are involved, is a wire fence affixed to the inner or outer face of the split-rail fence.

Parts of this page retrieved from "http://en.wikipedia.org/wiki/Split-rail_fence" available under the terms of the GNU Free Documentation License.

Copyright (c) Red Hot Fencing & Decks, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License".

 

 

 
HOME | PRODUCTS | SERVICES | ABOUT US | CONTACT US
Copyright 2006 Red Hot Fencing - All rights reserved.
design by 2WEBDEVS