Call for a FREE
Estimate
Click here for details

817.223.0977
or email us

Sherman area call
469.569.4092

The History of Fences / Fencing

RED HOT IMAGE GALLERY

Split-Rail Fencing
Click on a link below to see our porfolio of some completed projects!

We guarantee our work for one full year!

Click here for info

 

CHAIN LINK FENCES

A chain link fence is a type of woven fence usually made from galvanized or LLDPE coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.

Chain Link FenceIn the United States, fencing usually comes in 20 rod and 100 ft rolls which can be joined by "unscrewing" one of the end wires and then "screwing" it back in so that it hooks both pieces. Common heights include 3 ft, 3 ft 6 in, 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Common mesh gauges are 9, 11, and 11.5.

The popularity of chain link fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain link fences are transparent, and do not obscure sunlight from either side of the fence. If a semi-opaque fence is desired, this can be achieved by the insertion of slats into the mesh.

The installation of chain link fence involves setting posts into the ground and attaching the fence to them. The posts may comprise steel tubing, timber or concrete and may be driven into the ground or set in concrete. End (terminal) posts must either be set in concrete or ancored to prevent leaning under the tension of a stretched fence. After the end posts are set, line posts are driven in equally spaced at intervals of 2.5-3.0m. The fence is then attached at one end, stretched, and attached at the other; the excess being easily removed by "unscrewing" a wire. Finally it is tied to the line posts with aluminum wire.

Chain link fence recommendations

  • An optional tubular top rail to help prevent bending of wire tops
  • Setting line posts in concrete every 15m.
  • Fasten fence to end posts using tension bands and tension bars.
  • Bottom wire to deter animal digging and pushing
  • Stretch fence and wire with a ratcheting tension tool (comealong).
  • Use a post pounder or driving cap to help prevent deforming of post tops.

Parts of this page retrieved from "http://en.wikipedia.org/wiki/Split-rail_fence" available under the terms of the GNU Free Documentation License.

Copyright (c) Red Hot Fencing & Decks, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License".

 

 

 
HOME | PRODUCTS | SERVICES | ABOUT US | CONTACT US
Copyright 2006 Red Hot Fencing - All rights reserved.
design by 2WEBDEVS